Occasionally, you might need to remove a heater pad attached with an adhesive backing, whether for maintenance or replacement. Follow these steps to ensure safe removal and proper reinstallation:
1. Loosen the Adhesive with Heat
Apply gentle heat to the adhesive layer using a heat gun or a hairdryer. This softens the adhesive, making it easier to remove.
2. Slice Through the Adhesive with a Fishing Line
Take a fishing line and carefully slide it under the corners of the heater pad. Use a slow, sawing motion to cut through the adhesive layer little by little until the pad is free.
3. Clean Off Residue
Use a citrus-based cleaner to dissolve and remove any leftover adhesive residue. Be sure to follow the cleaner's instructions for safe and effective use.
4. Prepare for Reinstallation
If you’re reinstalling the heater pad, replace the adhesive layer with high-temperature silicone RTV sealant. Apply a thin, even layer of the sealant to the new surface, such as an aluminum or glass plate. Ensure no air bubbles are trapped during application.
5. Seal the Edges
To protect the edges, apply a thick bead of silicone sealant around the perimeter of the heater pad. This step adds durability and ensures a secure fit.
6. Apply Even Pressure and Let It Cure
Place consistent, even pressure on the heater pad's surface to secure it in place. Allow the silicone to cure thoroughly by following the curing time specified in the sealant's instructions.
By following these steps, you can remove and reinstall your heater pad with minimal hassle, ensuring a strong, durable bond for continued performance.
Related product links
We offer a wide variety of high-efficiency heaters and heating element.Such as polyimide/kapton heaters,silicone rubber heaters,PET transparent heaters, thick film heaters,PTC heaters, mica heaters,epoxy resin heaters and graphene heating film.
